bioCLASS Biometric Keypad Smart Card Reader

RWKLB575 Reader 6181

The bioCLASS products provide three levels of fingerprint verification. During the enrollment process, the CP575 is connected to your PC via a USB port. The software will guide the user to place their finger on the sensor. The fingerprint template is collected at the unit and immediately transferred to the card. During this enrollment process, the fingerprint template is stored ONLY on the card; it is never transmitted to an external host. During verification at the door, the LCD graphical display will assist the user with instructions about finger placement on the biometric sensor.

Benefits of the bioCLASS line include:

• Users can choose the level of security to meets their needs: card and PIN; card and fingerprint; card, PIN, and fingerprint.
• The finger pad at the bottom center of the biometric unit offers ease-of-use for either right or left-handed enrollment.
• The location of the finger pad is compliant with ADA standards.
• The bioCLASS RWKLB575 read/write contactless smart card reader with keypad, LCD display, and fingerprint biometric verification.
• LCD display provides feedback on user finger placement and defines custom menu keys.
• Fingerprint templates are stored on the iCLASS card and not in the reader, resulting in increased security, faster throughput, easier system management, lower costs for the biometric reader and reduced concerns over individual privacy.
• HID's offerings encompass the industry's broadest range of open standard contactless smart card products, available from over 40,000 resellers worldwide.

Specifications

• Reader Input Voltage: 9-12 VDC
• Current Range: 350 mA standby / 520 mA peak
• Cable distance to Host: 50 ft (15 m) max RS-232.
• 4000 ft (1216 m) max RS-485
• 18 Gauge Wire 300 ft (152 m) max Wiegand 22 Gauge Wire 125 ft (60 m) max Wiegand
• Op. Temperature: 32ºF - +113ºF (0ºC +45ºC)
• Open collector output: Sink 40 mA, source 1 mA.

Iris Recognition System

BM-ET330

Virtually instantaneous. No contact required.

Panasonic Iris Reader systems can verify identities automatically, without attendants, in a matter of seconds. And no contact with the iris cameras is required, which eliminates wear and tear, and contamination issues.

It's the surest way to authenticate identities in the high-security applications - with Panasonic dependability and quality.

Features:

• High Precision, Quick Recognition, Up to 5,000 Users, Flexible interface
• Built-in (COTS) off the Shelf Support for 13.56 MHz HID iClass(tm) Readers
• High Speed Processor - Recognition in 0.8 seconds
• 1,000 Local User Cache, 5,025 User Base Server Capacity
• Wiegand Input and Output - supports 125 KHz Proximity Cards
• Encrypted TCP/IP Interface
• SDK Availability for Custom Integration
• Enhanced RS-485 Interface
• Integrated Analog CCTV Camera - Connect to DVR
• Additional Language Support - Custom Audio prompts
• Built-in Real-time Clock for Time & Attendance Applications
• Supported by a Global Network of Access Control Manufacturers & Solution Providers
• Tamper Proof Design

BM-ET200

The BM-ET200 offers more accurate, faster, non-contact entry/exit control utilizing biometric technology for iris recognition. The system can be used to check IDs in a variety of applications, including airports and entry/exit control for many types of industries. Simple and easy to configure, the BM-ET200 has recognition results in 0.3 seconds.

Features:

• Fast, high-speed capture engine
• Distance Guide Indicator
• Three Settings for Voice Guidance
• Tamper Detection
• 25 User License Included
• Access Log Can be Searched by Time

Specifications:

• Detection of Eyes: Auto
• Recognition Time (Minimum): 0.3 seconds (approximate)
• Voice Guidance: Yes (14-Language)
• Maximum Registration Data (per camera):
• Stand alone mode: 50 Users
• Network mode: 5,025 Users
• Maximum Registration Data (per system):
• 10,025 users (4 cameras)
• Power:  12V DC or 24V DC
• Dimensions: (H x W x D)  7.5'' x 8'' x 3.0625''
• Weight:  1.98 lbs

Fingerprint Terminal

Fingerprint identification Biometric Terminal III

• Fingerprint Standalone setup.
• Connects to TimeFive and VoloTime Web
• Administration via Ethernet Cable

Includes:

• Power supply
• Latch control (12V)
• Grant access to 1 door
• Less then 2 seconds Fingerprint Recognition
• Up to 1500 Users

Fingerprint Terminal

IV Biometric Reader

F4 biometric reader and AccessFive software make an efficient access control system ready to be used in different places.

Technical specifications:

• Connects to AccessFive Administration via Ethernet Cable.
• Includes power supply and latch control (12V) to grant acess to a door
• Less than 2 seconds Fingerprint Recognition
• Up to 1500 users